Skip to navigation Skip to content

Go to Cue and update

I would to see one of macros on TM that I can go to cue select cue number. Also like when I want to update cue just press update . I would to see more improvements for theatre few nigging parts like tracking and make it more simple for theatre i.e. Musicals   

Matt Matt
published 03/30/2018 07:43

Quick copy of plalettes used by fixtures in Handle world

Hi, Handle Word is a really great fonction but, when there a lot of elements in a show, it is often need a long time to define & select what we want to integrate. It would be great to have options to automatcaly select Palettes, by attribute groups, shapes, cues, cuelists and chases that related to the selected fixtures that will be copied in the Handle World. Thanks Enjoy your AVOLife

Stéphane Mocret Stéphane Mocret
published 03/23/2018 09:09

Cue list : automatic go-to-the-top timer

Sometimes I have a cue list with some blinder effects, successively with different fixtures groups (for example beginning upstage and ending downstage at the end of the cue list). So each time I hit Go it does this blind effect with some fixtures. And I can be in time with the music. The idea would be to add a timer in the cue list options, so if after a certain amount of time the cue list hasn't been fired for a Go, it automatically goes to the top (first cue) for the next Go. To put this in the ...

Marc Marc
published 03/20/2018 18:34

Possibility of make "invisible", "dummy" or "unused" atributes on Personality Builder

Hi, a lot of fixtures have some rare functions like auto modes, because if you put a label like "empty", "not use" some operators move that channels, on other brands can make invisible these type of attributes, regards. 

Carlos Mendoza Carlos Mendoza
published 02/28/2018 21:20

Syn chases and shapes

When busking a show, it's really hard to match syn with chases or shapes even they are set by a same bpm master. I have a color and a dimmer chase and I fire the color chase, 0.3s later I fire the dimmer chase. They don't match and it's really hard to match them in busking. But if I have a playback option like "Fire At Right Second", it's very easy to syn them. There's a running timer and if I fire a playback at 12:00:30, it wait 0.7 sec then fire the playback. With this way at ...

kimwida kimwida
published 03/03/2018 05:38

Exclude Playback from grand master

A possiblity to exclude certain playbacks from grand master would be fine. Perhaps via setting a playback option"ignore grand master" or setting priority higher then grand master.

Josef Hackl Josef Hackl
published 12/22/2017 15:50

On-screen Faders

It would be useful to have the option of on-screen faders in the Playback window, like in the MagicQ Execute Window. For smaller consoles like the Quartz this would enable a more flexible approach to workflow, particularly on busking shows. At present for example, masters and intensity-critical playbacks must be put on faders, which can sometimes limit the diversity of playbacks that you can use elsewhere on the Executer buttons and in the Playbacks window.  

Cobain Schofield Cobain Schofield
published 12/15/2017 18:17

Custom lock screen with own logo, picture or message.

It would be very useful for a company logo, for a Phone number form the lighttech or even the logo of the event...

Taos Artwork Taos Artwork
published 01/04/2018 11:23

Fixtures and Groups, custom grid size per page

Fixtures and Groups. Pages Shown. I think it would be great if each separate page could have it's own grid design (rows and columns). Some fixture arrays will be even numbers, some will be odd. Some will be 10-20 (or more) in number across a row, some will 2-5 across a row. The intuitive layout of fixtures and groups does a lot for ease of use and programming, differing rows and column counts per separate page would aid this enormously.

Wayneskie Wayneskie
published 03/06/2018 20:14

Quiet Keys Version of Hardware...

This is more of a hardware than software request.  But a version of the console that has quiet keys would be great.  I get that the current keys used on the console are tried and true and rarely break, and that they give the operator instant feedback.  But they are loud.  It's hard to place this console in a noise sensitive environment (theatre/church/concert hall) where the booth is in the audience.  They hear each "go".  You could still enable some sort of haptic response to keys.  I also understand that I could have an external midi trigger or some ...

Dan Dan
published 04/11/2018 15:12

Cue List control from Remote App

Operate cue lists from iPad app.... GO, snap back, Previous Cue etc etc 

simongroom simongroom
published 04/01/2018 17:31

Track & replace values in a show

Hi, After having presenting Titan to many Theater & Opera operators, there is a request that is always asked, the ability to see where a/some fixture(s) is/are used in a show or where a/some fixture(s) is/are using a specific attribute value / Palette. It would be useful to have a Tracking window to see where selected fixtures are used and at which attributes values. We could also add filter(s) like dimmer value or palette of position. Last point would be to select some or all values/palettes and replace them by an other value/Palette. Enjoy your AVOLife

Stéphane Mocret Stéphane Mocret
published 03/23/2018 09:36

Patch from csv file

Hi, it would be interesting to be able to patch a show from a csv file. We could export the patch and fixtures positions from Wysiwyg or old capture version or other softwares and directly setup the show in Titan. thanks enjoy your AVOLife

Stéphane Mocret Stéphane Mocret
published 03/16/2018 10:09

Adding a swatchbook

Other Desks like the MA does have the opportunity to select colors according to the leading gel manufacters (Lee, Rosco). I would love to have this option on our AVO-Desks to.

RobinLotze RobinLotze
published 03/13/2018 14:13

Record State

Hello, As we have "Record Workspace" in the Setlist window, it would be very useful to have the same type of function, which we could call "Recod State", to memorize the status of all Cues, Cuelists and Chase as well as the position of all Faders and redo the same when track is enabled. An option to select what we want to save/reactivate could be an interesting Plus. thanks Enjoy your AVOLife

Stéphane Mocret Stéphane Mocret
published 03/02/2018 10:13

Chases created with palettes need an update.

At this time when creating a chaseor cue with a palette. You can update the palette and the chase will update according to the palette. But when clearing out for example color information out of a palette. The chase/cue will not learn that and will keep the last color information in his memory. Its better and more logical that if we clear information out of a palette, it will also be cleared out of the cues and chases made with that palette.

mvrental mvrental
published 02/27/2018 11:53

Option to turn cue lists into chases and vice versa

Seeing as cue lists are basically chases with more elaborate timing options it would be great to be able to turn chases into cuelists and vice versa. Or record everything as a cuelist first and by turning it into a chase it basically just disables options that aren't needed for chases.

sideshowbond sideshowbond
published 12/30/2017 22:15

Partial copy of Fixtures

Hi, Some days, especially for the festivals, we have more fixtures than for the original show and often not much time. I often want to just pick up the palettes to change / create a few cues without putting the mess during the show. It would be interesting, either when we copy a Fixture in the fixture window or with a new independent function, to be able to choose which elements of the show, Palettes of colors, position ..., Cues, Cuelistes, chasers shapes, we wish to copy on the Fixture destination.   Enjoy you AVOLife ...

Stéphane Mocret Stéphane Mocret
published 01/20/2018 10:12

Mobile Wing Window

Possibility to configure the mobile wing window into a single row mode

Gregory Gregory
published 02/01/2018 07:38

HTP autoload

If you have two playbacks running the same autoload and you release one of them, the autoload releases to. would be nice if there was a HTP option for autoloads so they remain if they are still running on a different playback

Bercic Bercic
published 01/09/2018 20:54

Random Shape

It would be awsome if there was a real random generated shape for example the dimmer of fixtures

die.gegenlicht.front die.gegenlicht.front
published 01/01/2018 20:44

Record raw DMX output

Add an option in the Record menu to be able to record the raw output and not the programmer values. For example, if we have a shape running, stopped at speed=0, if we hit Record it will record the starting position from the fixtures and not the actual position set by the shape.

Marc Marc
published 01/26/2018 09:24

Multiple instances of the same window

I'd love to be able to open the same window more than once. For instance have playbacks on both screens. Or have "Gobos and Beams" open a couple of times (Shutter, Gobo, Beam each on a different page all open at the same time).

sideshowbond sideshowbond
published 12/16/2017 21:29

Save your own (picture)legends

Even if I program a new show - some of my legends will be the same. Like special names for positions, special fixturelegends etc. Please make them storable.... THX

RobinLotze RobinLotze
published 01/31/2018 22:46

Connect Cue encoder fade

If you connect a cue rocorded on a button (not fader) to have the option selecting connect cue button+the playback recorded on the button and fade it in with the encoder wheels. ( similar to changing the active shapes with connect cue+shape)

Bercic Bercic
published 01/09/2018 20:59