- Updating Palettes:
If you had a number of fixtures patched of the same type and you recorded a shared palette on those fixtures, when you went to update that palette the first fixture would not be updated. You would normally notice this problem when using preset palettes during patching.
All fixtures now get updated correctly when updating a palette.
- Wheel Control:
Depending on your patch, some fixtures might have had some attributes that when controlled on the wheel the channels wrapped around back to zero.
This does not now occur and the channels behave correctly by stopping on zero or full.
- Timed Palettes:
The number of timed palettes that can be used at any one time is 5. Attempting to use more than 5 simultaneously is disallowed. A problem exists where occasionally, Timed Palettes will not run, even though the number in use is less than 5.
Now fixed.
- Playback LEDs:
Playback LED’s bleed up when the adjacent LED is active. A small number of consoles with serial number higher than PRL4001 may suffer from this problem. The problem is localized to the Playback LED; it does not affect the DMX output. The problem is caused by a forced change to Avolites because of the unavailability of components.
Installing this software will rectify the problem.